Tablet based laptop

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
jr7305
Newbie
Posts: 6
Joined: Mon Sep 28, 2020 10:27 pm

Tablet based laptop

Post by jr7305 »

Any suggestions on a tablet based laptop to use with the pico scope? My thinking is to mount the scope on the tablet. Is there a minimum spec required? Rather not dump a ton on a tablet just figured it would be convenient. TIA

faraday
OneWave
OneWave
Posts: 12
Joined: Fri Oct 30, 2020 8:15 am

Re: Tablet based laptop

Post by faraday »

I use Panasaonic fz-g1 all work ok except markers (i can't reach them), I use picoscope 6 automotive.

jr7305
Newbie
Posts: 6
Joined: Mon Sep 28, 2020 10:27 pm

Re: Tablet based laptop

Post by jr7305 »

6 definitely not tablet friendly. Can’t pull them cursors in tablet mode.

picowight
OneWave
OneWave
Posts: 44
Joined: Sat Oct 26, 2019 6:45 pm

Re: Tablet based laptop

Post by picowight »

I have 6 on a "convertible" laptop/tablet HP elite book. Works Ok except any attempt to zoom with touch just crashes it.

Post Reply