Capturing CAN network errors hands-free

Ask any questions about using the new PicoScope 7 Automotive software here.
Post Reply
Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1521
Joined: Sun Aug 25, 2013 7:22 am

Capturing CAN network errors hands-free

Post by Steve Smith »

Via our support email (support@picotech.com) we receive inquires across the entire spectrum when it comes to PicoScope. These inquires vary from operating system queries through to bespoke analysis techniques and everything in-between

Several inquires result in the creation of brief tutorial videos that help reduce response times by avoiding lengthy written replies

As a result, a number of these video tutorials are perfect for the forum as we all (regardless of knowledge level) can benefit

Rather than use links to videos, I have chosen to embed an unlisted YouTube tutorial video as Ben has demonstrated here viewtopic.php?p=101693#p101693 looking at CAN current flow

Below is a short video demonstrating the use of a scaling, offset, math, masks and actions when capturing CAN network errors (hands-free) using PicoScope 7 Automotive Early Access



Here is the psdata file from the video above:
20230719-0001.psdata
CAN Math, Mask & Action
(5.35 MiB) Downloaded 181 times


I hope this helps

Take care…….Steve
Top
Post Reply

Return to “PicoScope 7 Automotive software”