PicoScope 7 Automotive
Available for Windows, Mac, and Linux, the next evolution of our diagnostic scope software is now available.
2012 BMW X5 35d M57 diesel
2012 BMW X5 35d M57 diesel
Crank no start/stall. Error codes show bank 2 injectors disabled. It will start, run for a couple seconds and then the DME shuts down the fuel.
I have replaced the injectors, had the DME tested on another car, and all is good.
I believe I am loosing fuel pressure. Data PID shows that the fuel pump is running at about 75% of requested speed. Wondering if I have a bad pump rotor winding as no fuel pump codes present.
I don't want to throw parts, like the HPFP and Pressure sensors, volume control valve, etc.
Any collective thoughts?
I have replaced the injectors, had the DME tested on another car, and all is good.
I believe I am loosing fuel pressure. Data PID shows that the fuel pump is running at about 75% of requested speed. Wondering if I have a bad pump rotor winding as no fuel pump codes present.
I don't want to throw parts, like the HPFP and Pressure sensors, volume control valve, etc.
Any collective thoughts?
- Attachments
-
-
-
- BMW_X5_2012_Diesel_20230707-0002.psdata
- (4.64 MiB) Downloaded 326 times
-
-