Using rulers

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
jr7305
Newbie
Posts: 6
Joined: Mon Sep 28, 2020 10:27 pm

Using rulers

Post by jr7305 »

Sometimes when using the rulers after doing a relative comp test it comes up with the 0 and 360 instead of 0/720 degrees. Am I missing something?
Top
liviu2004
TwoWaves
TwoWaves
Posts: 474
Joined: Sat Mar 19, 2016 8:23 am
Location: Netherlands

Re: Using rulers

Post by liviu2004 »

You can overwrite the values as you wish.
Top
krzakx
Newbie
Posts: 1
Joined: Wed Oct 07, 2020 8:37 am

Re: Using rulers

Post by krzakx »

Hi!
How to get waveforme value out from the ruler?
I was trying measurment but without success, I need simple signal value at ruler place.

https://ibb.co/6DdKsxb/ruler.jpg
Top
Post Reply

Return to “PicoScope 6 Automotive software”