Hello and thank you for the posts Sorry, I should have clarified the version I used to provide the above screen shots (Version 7.0.103.11746 EA) as seen in image 1 (The version used to open the file displayed) Sorry I should have tried the same tests with the latest EA as that is what you used to r...

Click on More > About PicoScope 7 to reveal the Scope model and Serial number used to acquire the loaded capture Steve, I tried this using PS7 Stable 7.0.80.9125. The software version shown is the current version of PS7 on the PC used to open the .psdata file. The scope model and serial number are ...

I don't know what you mean by the phrase "Snap-On compression adapters." The Pico hose is the best.

https://www.aeswave.com/Foster-2-Series ... p9448.html

My scope does not have isolated grounds between each channel so I cannot do a cam/crank relationship test, ... See the following forum post with a reply by Steve Smith for how to connect your scope inputs and grounds https://www.picoauto.com/support/topic22834.html?&p=103142&hilit=common+ground#p10...

Yes i know, but when i record the signal with 20ms/div and the other one with 50ms/div i can not compare it I can't give you a tutorial in a forum post on how to use Pico Views and Reference Waveforms. Basically reference waveforms, scope views, zoom window, and scaling are how you accomplish what ...

You will use software features "reference waveforms" and "views."

My guess would be you are looking at direct current flowing into and out of a high voltage component(for example the HV battery or DC/DC converter). It's up to the engineers to decide which current direction is displayed as negative or positive on a scan tool PID.

See my reply in this forum post: How to use TA329?
topic22354.html

I have seen this rocker fell off issue on a Lexus engine of similar year, similar engine design but V6. I did the same as you, replaced the rocker and hydraulic lifter. Did a leak down test, passed, same as a known good cylinder. Did a compression test, passed, same as another known good cylinder. R...

I did take a capture with cam sensor and ignition. Unfortunately the ignition was shut down to cylinder under test while capturing cam signal. I have included two psdata files. The one with ignition trigger was crank no start. File "0002": the ignition timing signal is not pulling to ground. See my...