Brand New PicoScope 4425A For more information Our exciting new PicoBNC+™ probe connectivity, unique to PicoScope 4225A and 4425A oscilloscopes, provides you with: Channel status lights to show you which probes and channels to connect and their status when you...
Brand New PicoScope 4425A For more information Our exciting new PicoBNC+™ probe connectivity, unique to PicoScope 4225A and 4425A oscilloscopes, provides you with: Channel status lights to show you which probes and channels to connect and their status when you...
Hi dorcky Really sorry for the delay as I have been travelling. Please always feel free to email support@picotech.com for anything requiring an answer. Anyway, the details are: The Thread size for the ¼” OD compression is 7/16" X 24 The brass fitting is a part of the Watts A-22 (LFA-22) Compression ...
Hi mkampstra Not sure how you were looking to make that trigger. As you know, there is no separate 'external trigger' input on the automotive scope but you can trigger on any channel. You also have lots of possibilities on what kind of trigger you want and the thresholds. This means that you could u...
Hi Liteace I know this thread is quite old, but I just wanted to finish it off with the reminder for anyone reading. I spoke with Ben and know that we sent some bits over to you last year to resolve your immediate issue. I did want to remind anyone else reading this post to always email support@pico...
Hi Mark thanks as always for the contributions on the forum. The Roadshow is absolutely aimed at non-scope, and beginner (maybe up to intermediate) level scope confidence. As you say, it is not training for intermediate/advanced users (there are many other places to obtain that), but is more about u...
Hi Mark Welcome to the Pico forum. I hope you find someone near Kendal that would be happy to show you hands-on use. We have a couple of our distributors running roadshow events this year (Preston and Carlisle), although they are more than 40 miles for you. https://www.picoauto.com/library/roadshow/...
Hi dorcky If you are talking about the outside flat-to-flat on the brass nut then it is half inch. I can be sure about my sample from stock as I measured it last night and this morning. Let me know if you were after something different as I may not have been measuring what you wanted. Best regards, ...