Liteace wrote:I see the comp hoses for the WPS kits have been updated, when did this happen ?

One of the hoses in the "early" kit is a proper PITA, I think its the 14mm, the one with the threaded collar on, every time its removed / unscrewed from the engine the collar unscrews with it and buggers up the rubber seal, what do we have to do to solve the problem buy the newer type hoses ?

speck wrote:Hasn,t happened to me once. How about putting a drop of
lock tight on.

ben.martins wrote:Hello Liteace,

Please accept my apologies for the late reply. I believe the hoses were changed a number of years ago for the newer type. The decision being you would only need to change the end rather having a number of different complete hoses therefore keeping costs down and eliminating the need for the collar.

The 'o' rings used can easily be replaced and quite a common size especially if you work with A/C systems as they can be found within an 'o' ring replacement kit.

If you did decide that you would like to upgrade your existing hoses, which will still fit with your WPS500X. If this is something you might consider then drop an email into us and we can help you from there.

Kind regards

Ben

Liteace wrote: get ignored when needed!!!!!!!!