PicoScope 7 Automotive
Available for Windows, Mac, and Linux, the next evolution of our diagnostic scope software is now available.
Hi Martyn,Martyn wrote:Resolution Enhancement shouldn't be reducing the number of samples but it will have an effect on the data as it uses a moving average filter........
Thank you for explaining that; I really appreciate that valuable bit of information, especially that resolution enhancement can be applied to the raw data after capture. I knew that applied to low-pass filtering but didn’t know about resolution enhancement. After this little exercise, I feel I know my PicoScope a lot better than before.Martyn wrote:Sorry I misunderstood your point. When applying Resolution Enhancement, Lowpass Filtering or Math Channels to a running signal, the software will limit the samples per screen to a maximum of 5MS. This is to control the amount of data that the software needs to receive over the USB bus when capturing a signal.
However if you capture the data raw, then apply any processing post capture, the number of samples will not reduce.
Excellent. If you manage to duplicate the capture shown in my image above, you will learn a lot more.After this little exercise, I feel I know my PicoScope a lot better than before.