Intake vaccum with wps500

If you are not a PicoScope user and want advice with a diagnostic problem then post here. Forum members may be able to help.
Post Reply
Jesper
Newbie
Posts: 8
Joined: Wed Nov 25, 2015 9:53 pm

Intake vaccum with wps500

Post by Jesper » Sun Jul 07, 2019 9:14 am

Hello.
I am new to the WPS stuff, so thought that i would play around with it. It is A 2,0 natural aspirated engine, with very light/small misfire sympthoms 1800 rpm.
I messure intake vaccum,idle, and i think that it looks suspicius that every 2. drop looks different, like the valve overlap is different on 2 of the cylinders. Can anyone clear that out. I think mabay the tappets is worn out, because of a tapping noise cold.

Best Jesper

Attachment one pico file.
Attachments
Only one picture frame 1.psdata
(1.01 MiB) Downloaded 13 times
Only one picture frame 1.psdata
(1.01 MiB) Downloaded 10 times

landroverman1958
OneWave
OneWave
Posts: 36
Joined: Thu Dec 04, 2014 7:53 pm

Re: Intake vaccum with wps500

Post by landroverman1958 » Sun Jul 07, 2019 9:45 am

Good morning,why dont you put the pressure sensor in the exhaust?that way you can see if you have any exhaust un eveness,or do an in cylinder pressure reading. :idea:

Post Reply