Nissan Micra K12 2003 1.4

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
Elstal
Newbie
Posts: 3
Joined: Sun Dec 17, 2023 11:04 pm

Nissan Micra K12 2003 1.4

Post by Elstal »

Hi Hello
I'm new on this forum :) PicoScope 4425A owner
I want to ask You about timing CMP and CKP in Nissan Micra 2003' 1.4 benzin
Why if lock vertical rulers (timing line) i have extend timing on ckp and cmp?
It does it mean that costumer have stretch timing belt ?
Attachments
21.jpg
45.jpg
56.jpg

User avatar
vasek
TwoWaves
TwoWaves
Posts: 106
Joined: Tue Feb 17, 2015 7:27 pm

Re: Nissan Micra K12 2003 1.4

Post by vasek »

Hi.
First of all, you need to pay attention to the inverted signal of the camshaft sensor.
The signal plate is made with four groups of recesses.
The number of recesses corresponds to the serial number of the cylinder, where the upper dead center of the stroke is expected.
Accordingly, the sensor signal must have positive pulses with a number of teeth equal to the cylinder number.
Only after replacing the sensor ,the condition of the timing chain can be judged.
Attachments
NISSAN CR12 SYNC 2ms.png
NISSAN CR14 _ CAMSHAFT SENSOR SIGNAL.PNG
NISSAN CR14 _ CAMSHAFT SIGNAL PLATE.PNG

Elstal
Newbie
Posts: 3
Joined: Sun Dec 17, 2023 11:04 pm

Re: Nissan Micra K12 2003 1.4

Post by Elstal »

Thank you very much for your replay. Why are you writing about changing to new sensor ? :)
Are you suspect sensor damage? Actualy I'm after replacing to new. Recesses doesn't match like on your image.
Attachments
m.jpg

User avatar
vasek
TwoWaves
TwoWaves
Posts: 106
Joined: Tue Feb 17, 2015 7:27 pm

Re: Nissan Micra K12 2003 1.4

Post by vasek »

Here is an example of a stretched chain on a NISSAN CR14DE engine.
According to the scanner, the error is 15 degrees late.
In fact, 10 degrees late.
Attachments
CR14DE _ THE CHAIN IS STRETCHED.PNG

Post Reply