Pico Scope

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
CheeklawGarage
Newbie
Posts: 2
Joined: Thu Nov 16, 2023 6:06 pm

Pico Scope

Post by CheeklawGarage »

Hi I’m new to your forum, looking to get on the Pico scope ladder with my Garage business, which package do you recommend ? Cash flow isn’t too bad for us as we’re a busy diagnostic Garage using various scan tools and bits kit from Snap On and Bosch and Autel , I’m not afraid to take on jobs that other garages can’t get to the bottom .
Thanks and I look forward to getting your advice on here. Keith Hall
Top
Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1594
Joined: Sun Aug 25, 2013 7:22 am

Re: Pico Scope

Post by Steve Smith »

Hello Keith and welcome to the forum, thank you for the post

Whenever this question comes up I always recommend the 4-Channel Standard kit here https://www.picoauto.com/products/autom ... omparekits

4-Channels are a must so as to ensure you have enough options for measuring power, ground and signal or, Crank Cam's and ignition/injection

If you are also taking on High voltage vehicles then our EV kit will have you covered here https://www.picoauto.com/products/elect ... id-vehicle

I hope the above helps and sorry for the late reply

Take care.....Steve
Top
CheeklawGarage
Newbie
Posts: 2
Joined: Thu Nov 16, 2023 6:06 pm

Re: Pico Scope

Post by CheeklawGarage »

Hi Steve,
I have had a look on the site here and spoken to a Tech who uses Pico Scope and he's pointing me towards the 4 Channel Advanced kit along with the WPS500X Pressure Transducer Kit, I will be in touch with the sales people this week to place an order.

Thanks Keith Hall
Top
Post Reply

Return to “Automotive kit hardware”