PicoScope 7 Automotive
Available for Windows, Mac, and Linux, the next evolution of our diagnostic scope software is now available.
Fluke clamp meter 333
-
Treyrooster
- Newbie
- Posts: 1
- Joined: Sat Jul 08, 2023 4:18 pm
Fluke clamp meter 333
Can I use this meter attached to my picoscope to generate a waveform? I don’t want to damage either. Has anyone tried this?
-
ben.martins
- Pico Staff Member
- Posts: 545
- Joined: Tue May 16, 2017 1:02 pm
Re: Fluke clamp meter 333
Hello,
I've taken a quick look at the clamp and it doesn't appear to have an output. Without that we have no way of providing the scope the input it needs to display the waveform. https://www.myflukestore.com/p1247/fluk ... _meter.php
Also looking at the specifications, this clamp can only measure AC current. This will mean testing injector current for fuel pumps, injectors, alternator output will not be possible as these require a DC current clamp to measure amplitude.
Hope that helps in some way.
Kind regards
Ben
I've taken a quick look at the clamp and it doesn't appear to have an output. Without that we have no way of providing the scope the input it needs to display the waveform. https://www.myflukestore.com/p1247/fluk ... _meter.php
Also looking at the specifications, this clamp can only measure AC current. This will mean testing injector current for fuel pumps, injectors, alternator output will not be possible as these require a DC current clamp to measure amplitude.
Hope that helps in some way.
Kind regards
Ben