PicoScope 7 Automotive
Available for Windows, Mac, and Linux, the next evolution of our diagnostic scope software is now available.
Ford Fiesta ST3 Cam/Crank Correlation
Ford Fiesta ST3 Cam/Crank Correlation
Hi
I have been looking at a 2017 Ford Fiesta ST which had a reconditioned engine put in it. It was a no start but after using the correct timing tools it now starts and runs great.
Randomly, however, it keep throwing codes P0016-78 (Camshaft Position Correlation Bank 1 Sensor A) and P0017-78 (Camshaft Position Correlation Bank 2 Sensor A).
I have scoped the cam sensors and crank sensor but can't find a known good for this engine. Is anyone able to help or have any idea why I would randomly get these codes?
I have been looking at a 2017 Ford Fiesta ST which had a reconditioned engine put in it. It was a no start but after using the correct timing tools it now starts and runs great.
Randomly, however, it keep throwing codes P0016-78 (Camshaft Position Correlation Bank 1 Sensor A) and P0017-78 (Camshaft Position Correlation Bank 2 Sensor A).
I have scoped the cam sensors and crank sensor but can't find a known good for this engine. Is anyone able to help or have any idea why I would randomly get these codes?
- Attachments
-
-
Dcunning35
- TwoWaves
- Posts: 239
- Joined: Thu Jan 28, 2016 12:33 pm
Re: Ford Fiesta ST3 Cam/Crank Correlation
You will need to run the ckp learned values reset with IDs ,
Alternatively clear the pcm learned values with forscan.
The misfire profile correction should also be run to ensure the diagnostic monitors for sensing misfires are learnt correctly and do not cause false triggering of DTC,s .
Regards
Danny
Alternatively clear the pcm learned values with forscan.
The misfire profile correction should also be run to ensure the diagnostic monitors for sensing misfires are learnt correctly and do not cause false triggering of DTC,s .
Regards
Danny