RPM Tracking for Primary Waveform on PicoScope?

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Ingraham

RPM Tracking for Primary Waveform on PicoScope?

Post by Ingraham » Sat Feb 25, 2006 12:41 am

A tradition auto scope adjusts the time scale as the RPM changes so that one cycle of the primary waveform stays a constant width (e.g. 1, 4, 6, or 8 cylinders across) on the screen. Does the PicoScope software do that? Thanks.

User avatar
ricardo
OneWave
OneWave
Posts: 25
Joined: Wed May 07, 2003 9:43 am

Post by ricardo » Sat Feb 25, 2006 11:45 am

Hi,

Thank you for your enquiry. PicoScope cannot automatically adjust the timebase as the RPM changes, you have to adjust it manually.

Best regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator

Post Reply