Is there a chance you might be able to do an educational video on creating custom probes, please? If I select a channel, select "probes", scroll down and select "Custom", I can see the possibility of making a custom probe for the colored secondary ignition probe. When selecting the custom colored secondary ignition probe, the selected icon doesn't change to any kind of a dialogue.
Thank you very much for your assistance in advance,
DougS
I was just navigating in PicoScope 7 software a bit more and think I have answered my own question. . I will be trying this out and see how it works.
Thank you,
DougS055
I am able to select the custom probe, ie.. Colored KV Probe (which are attenuated 1000:1), but was not able to get into the area where one can be made or where the probe values can be edited according to what is needed for a particular diagnostic test. Again, thank you for your assistance with this question.
DougS
I went back over a couple of emails sent to me by Steve and am now able to understand custom probes made in Pico6 software are able to carry over to Pico7.
Thank you,
DougS
Hi Doug, We are busy adding features into PicoScope 7 and custom probe creation is coming soon. As Steve mentioned there is a workaround which is to create them in PS6. If you load a .psdata file that used a custom probe in PS6 into PS7 you have the custom probe.