good morning, i have a focus with bad running issues, hunting a lot, no response from throttle pedal. if the ignition is switched off and on an few times it will eventually start and run fine.
I'm very new to the picoscope and would like to know if the attached CAN H and CAN L wave forms are correct, again excuse my ignorance!
many thanks
matt
Hi ,a can communication error wouldn't result in hunting at idle and no throttle response.
So lets start again have you any dtcs stored?
Id be starting with basics air leaks on the intake , but let me know on the dtc,s etc and il try and assist.
Danny