Pico 4 channel 4423

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.

Re: Pico 4 channel 4423

Postby Technician » Thu Sep 14, 2017 10:57 am

The course is a diploma in automotive electronics, the exact course title I would have to dig out the paperwork, but as I have one member on the forum who appears to be a problem, maybe its better not to disclose my area and college.
Technician
TwoWaves
TwoWaves
 
Posts: 364
Joined: Thu Apr 24, 2014 10:32 pm

Re: Pico 4 channel 4423

Postby PicoKev » Thu Sep 14, 2017 11:46 am

Seriously; :shock: I am interested in the course and the college offering it. No worries about not wanting to go public but I would appreciate a DM via the forum if you have a contact name at the college as well that would be great. :D :D

Kev.
PicoKev
TwoWaves
TwoWaves
 
Posts: 108
Joined: Thu Apr 05, 2012 11:16 am

Re: Pico 4 channel 4423

Postby Technician » Thu Sep 14, 2017 2:46 pm

Where are you based in the country Kev!
Technician
TwoWaves
TwoWaves
 
Posts: 364
Joined: Thu Apr 24, 2014 10:32 pm

Re: Pico 4 channel 4423

Postby Technician » Sun Sep 17, 2017 8:06 pm

liviu2004 wrote:Use attenuators, I think Pico sells now 10:1 version.


Done some research, thanks for the above, yes it is needed for the 4423 scope. I also ordered the 20/60A clamp, the clip for holding leads away from the engine components etc, don't want to see noise on the signals if I can help it :wink: .

I have a 600A Fluke ammeter but was not sure it could be connected to PicoScope as it has banana leads, however looking through my accessories I have a BNC to 4 mm banana adapter so yes I can use it and when other parts delivered I'm good to go :D
Technician
TwoWaves
TwoWaves
 
Posts: 364
Joined: Thu Apr 24, 2014 10:32 pm

Re: Pico 4 channel 4423

Postby AuthorMike » Mon Sep 18, 2017 10:27 am

Technician wrote:
liviu2004 wrote:Use attenuators, I think Pico sells now 10:1 version.


Done some research, thanks for the above, yes it is needed for the 4423 scope. I also ordered the 20/60A clamp, the clip for holding leads away from the engine components etc, don't want to see noise on the signals if I can help it :wink: .

I have a 600A Fluke ammeter but was not sure it could be connected to PicoScope as it has banana leads, however looking through my accessories I have a BNC to 4 mm banana adapter so yes I can use it and when other parts delivered I'm good to go :D


Great news, will be good to see your PicoScope captures over the coming weeks :)
Mike Valentine
Technical Author @ Pico Technology UK
AuthorMike
Pico Staff Member
Pico Staff Member
 
Posts: 337
Joined: Mon Jan 31, 2011 1:22 pm
Location: UK

Re: Pico 4 channel 4423

Postby Technician » Mon Sep 18, 2017 2:39 pm

AuthorMike wrote:
Technician wrote:
liviu2004 wrote:Use attenuators, I think Pico sells now 10:1 version.


Done some research, thanks for the above, yes it is needed for the 4423 scope. I also ordered the 20/60A clamp, the clip for holding leads away from the engine components etc, don't want to see noise on the signals if I can help it :wink: .

I have a 600A Fluke ammeter but was not sure it could be connected to PicoScope as it has banana leads, however looking through my accessories I have a BNC to 4 mm banana adapter so yes I can use it and when other parts delivered I'm good to go :D


Great news, will be good to see your PicoScope captures over the coming weeks :)


Can't wait :D :D :D
Technician
TwoWaves
TwoWaves
 
Posts: 364
Joined: Thu Apr 24, 2014 10:32 pm

Previous

Return to Automotive kit hardware

Who is online

Users browsing this forum: No registered users and 0 guests