hi i am new here and i take a pico 4425.i want to know if pico software can put in raster or parade future to read spark kv spark time like other scopes.i think it is good and help more.thanks
Hello and welcome to the forum, thank you for the post.
Regarding Raster formation (Stacking) you can utilize each channel for each ignition event (Up to 4 with a 4 channel scope)
They will however be displayed only when each ignition event occurs (in order of time)
For example use a rising edge trigger on channel A for the ignition event from Cylinder 1 and connect cylinder 3 to channel B, cylinder 4 to channel C and cylinder 2 to channel D. (4 cylinder engine with firing order 1342)
Select a time fame of around 20 ms/div where you will see all ignition events taking place in order on one screen at idle speed
For Parade formation you would need to purchase the Mixmaster which is of real benefit for engines exceeding 4 cylinders