Ask for and share advice on using the PicoScope kit to fix vehicles here.
volrem
TwoWaves
Posts: 243 Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia
Post
by volrem » Fri Jun 20, 2014 8:03 am
Hi guys.
Does anyone have known good cam and crank correlation capture for Volvo 1.8L B4184S8 engine?
It's Ford engine on 2006 V50.
FIle with unknown condition attached.
Thanks
Attachments
B4184S8 2006 V50 crank + cam correlation unknown.psdata
(1.35 MiB) Downloaded 759 times
Last edited by
volrem on Fri Jun 20, 2014 6:24 pm, edited 1 time in total.
Steve Smith
Pico Staff Member
Posts: 1594 Joined: Sun Aug 25, 2013 7:22 am
Post
by Steve Smith » Fri Jun 20, 2014 10:00 am
Hello Volrem, thanks for the post.
I have just checked through my library here with no joy. This would be a great opportunity for a possible upload of this waveform to the waveform library.
I have checked and whist there are a number of Volvo cam and crank signals, none for this model.
Can anyone assist here and upload as per
http://www.picoauto.com/support/topic10063.html
Take care......Steve
volrem
TwoWaves
Posts: 243 Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia
Post
by volrem » Fri Jun 20, 2014 1:03 pm
I think Ford engine codes should be QQDB and Q7DA. Installed on Focus and C-Max
1.8 92 kW
volrem
TwoWaves
Posts: 243 Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia
Post
by volrem » Fri Jun 20, 2014 6:28 pm
I found a waveform from iATN for 2.0L Ford Focus and it's excactly the same.
So it makes me think that timing is correct.
But maybe someone has one for 1.8 L engine and can confirm.