Hello Steve, Thank you for taking the time to deep dive into this topic. I have one suggestion, why don't we use the manufacturer installed battery sensor as a shunt resistor? Generally these are 100 micro Ohm shunt resistors with a monitoring circuit. By using this method we have the advantage of n...
Good morning all, I recently read through a math article by Steve regarding using an inline 0.1Ohm resistor instead of using a current clamp to avoid probe drift etc. Firstly, fantastic idea, and so I started to look for panel mount resistors with a high wattage. The highest I could find would be 30...
Hi Guys, In my opinion trying to test a key fob, with a carrier frequency of around 433Mhz is not possible with an oscilloscope with 20Mhz bandwidth. You would need an oscilloscope with a bandwidth of at least 1Ghz to perform these measurements. These type of scopes are incredibly expensive. What wo...
Hi Guys, Wondered if you had plans to sell a BNC extension cable, but with a female to male end. The reason I ask is because I frequently have issues with cable length when performing CAN bus wakeup measurements. I don't want to extend the regular test leads as this will give too much capacitance in...
Hi Guys, One for the support guys here I guess. Is there any possibility in the future of being able to output the serial decoding log to ASCII or BLF format? I see at the moment there are only .csv and .ods format available The reason why I ask is because ASCII and BLF format can be imported into V...