That's the Demo waveform. When you open PS7 will ask you if you want to run the demo or access the attached scope, if you don't have a scope attached and don't want the demo just hit cancel.
Though you an also use all the controls on the demo to practice using the software.
So I bought a TA496 and it is just great! Never realised how much of a faf setting up an Amp clamp was until you use one that you just plug in, no batteries, no scale setting, no auto switch off (or not!). 5ma -60A is perfect for just about everything except an RC test. Smaller jaws are a bonus too....
That's an interesting one - this is at idle I assume from the intake vacuum. I would say a leak between cylinders as the pressure starts to increase at 60 ATDC when all the valves are shut (or supposed to be) that can only come from another cylinder. If an exhaust valve was open it would decrease - ...
Obviously the crash should not happen! I think the issue - at least with the example you posted is that you do not have a full screen of just the data you want to examine. Picoscope sees the first Highs and low of the data - the current for example and works out where to take it's frequency measurem...
Tried to submit this on the bug report screen under "feedback" from latest EA Linux version: 7.0.114.13322 Unless it is operator error, advanced trigger does not seem to work on the demo. Example in pic attached. Thanks Picowight and tried to attach this pic to show what I mean adv trigger on demo.p...
If you just want to see timing change relatively over the rev range/load, scope an injector and trigger off any fixed point on a cam waveform using an advanced trigger.