Hello,
Starting with 2.3.1 version Forscan will support PATS programming on Transit (2006-2011)if you have the extended licence,but for this task I will use IDS and VCM2
Best regards

Hello,
For this kind of issues use a dedicated tester to check if LIN communication is good or not.Here is an example of 2012 Fiesta 1.2 Petrol with an aftermarket regulator
Only OE alternator was the solution.

Hello, Sometimes I have the same freeze when I use USB 3 port +cable,the scope can't be detected other times :( Not work with extended cable,crash again and again :oops: ,only after the cable cleaning work. Using USB2(without SS marking) port or cable no more freeze or undetected scope,I think is ve...

PicoKev wrote: ↑

Thu Jul 04, 2019 9:53 am

2 Bits.....

Sometimes it matters that 2 bits...for a lower ground noise,for a better resolution
some years has passed from 4223/4423 release
Maybe it's time to return to a 8 bit scope?

Hello,
This is a good news,when a 14-bit oscilloscope will be released for automotive?
Best regards

Hello,
Without some captured files use only the attached files.
Best regards

Thanks Kev, Anyway,here you can find the capacitance of different cables if you need to make the right choose http://www.rfcafe.com/references/electrical/coax-chart.htm but according to my measurements a twisted pair of wires(even if will have 3-5 meters) and a male BNC plug is good for use for CAN ...

Hello, Here you will find some answers,I think I attached some measurements of capacitance/meter of different types of cables :) https://www.picoauto.com/support/topic21591.html?&p=98078#p98078 Use the shortest cable what you have to make a good CAN capture,TA130 is good for pressure sensors ,not fo...

Hello,
For me work good on w7/64 bits,no freeze,only sometimes the scope can't be detected at starting.
I can load/create custom probes,I can use the pressure sensor in PicoDiagnostics/CompressionTest
Best regards

Steve Smith wrote: ↑

Thu Feb 07, 2019 11:55 am

The crash has been rectified Victor and we are testing a "Release Candidate" version as we speak.

Hello,
Some good news about the improved version?
Will be available an"automotive brother" of Pico 5442D MSO?
Thank you