For measuring gasoline port injectors on a +- 2 A input range these pulsations (whist present) should not impact on your measurement Hello Steve and thank you for the answer In the attached image you will find the reason of my question,on a 2014 Prius with port injection I can't see the opening mom...
Hello, For this issue I will record the secondary voltage ignition with COP probe to catch injection malfunction like in the attached file(please look at cyl 4 burning time compared to the other IMG_20211002_123714.jpg / at the 4th injector(with lower spray cone,lower injected quantity )compared to ...
Hello, Someone know how to remove the noise from a TA018 clampmeter.In the attached file is the noise,laptop work on battery,no current is measured.BNC cable was checked and found good,the clampmeter can't be used to check injectors on petrol engines because of this noise at 630Hz. Also I checked on...
Hello, Immo can't block the ECU communication,try to connect at A24/A25 your CAN decoder only(without AT,ABS,BC,...) to see some CAN activity,also please check if on A28 the main relay is turned on by ECU when ignition is ON.What tool was used for diagnose?Try to diagnose only your ECU on A24/A25,wi...
Hello,
With the battery disconnected what value of resistence you can measure in DLC between 6 and 14?With EDC17 in network and unplugged?If the value will change from 60 to 120 ohm then your ECU is faulty or without supply.Do you know the location of 61126 resistor?
Best regards
Hello,
I think is not the "crossing point" issue is more about how the ECU read the engine speed,please look at the attached file.Using the attached info you will find how the extra dip from the area with missing teeths is readed by ECU as a normal teeth.
Best regards
How on earth does an exhaust valve open 18 degrees after the intake valve? That makes no sense? How have you worked out when the EVO is in regard to crankshaft degrees? I still can't see any IVO or EVO in the last upload? Are we missing something here?