Hello osiarg, Thank you for your kind words! I appreciate that there isn't much here for motorcycle technicians but hopefully a lot of the techniques carry over from the automotive world. We have spent some time with motorcycles having previously looked at a Triumph Bonneville for crank start and th...

Hi Paul, It sounds like induced voltage into the test leads potentially. It might be something on the ground side back feeding but hard to say. If you get a bit more time on the capture, say 50ms/div you should be able to tie in any interference you're seeing with another timed event. If you aren't ...

Hi Paul, I would always go high, that way you can always come back down the range but you'll always see something. If you have the 2204a on it's way and looking to scope injectors please make sure you use an attenuator and connect to one side of the injector and the reference to chassis. Attenuators...

Hi all, Thank you for the feedback and the kind words. We've always said that if something we put out there helps at least one person then it's worth while. The J1939 decoder in PS7 has been a great asset to working with J1939 networks. By being able to see the source address and even creating a lin...

For those that are actively working with EV's, insulation testing becomes part of the normal routine. Within the Pico EV kit we include an insulation tester which allows users to perform the measurement. So what is insulation testing? Insulation testing is designed to measure how much ‘leakage’ of v...

Interestingly I had the same thing again when putting that reply up so don't think it has anything to do with content of the post.

What I did find though was hitting submit again saw the post uploaded.

All very strange.

Hi all,

I had the same issue yesterday when uploading an article. Not really sure what's going on unless it's to do with images and length of post.

I thought it might have been a one off liviu but clearly not. I'll see what I can find out.

Kind regards

Ben

Hi all, Hope all are keeping well. This is a mini case study of sorts but I also wanted to bring another example of where serial decoding can be used to help qualify data between the scan tool and what is available on the CAN network. Customer support called for issue with a Manitou reporting that t...

Hi Paul, Injector voltage levels between engines can vary. From the injectors I've seen it sits somewhere between the 50V and 150V. This can either be the driving voltage or the fly-back voltage once the injector is switched off. The new 4425A is more that capable of handling these voltages but for ...

Hi Paul, Welcome to the forum and great to have you on board. Any scope is better than no scope and when you're ready a 4 channel Pico will open you're eyes further to what is possible. There is a lot of information on this site and a good place to start is the useful links page - https://www.picoau...