Hi Unfortunetly I dont have a wps to check coolant pressure but I put a mechanical gauge on it it goes around the clock within roughly 5 secs even when started from cold, the source of the coolant loss was due to a failed egr coolant pipe which has since been rectified, The sync in the waveform is f...

I have a 2016 3.2tdci Ford Ranger that is pressurising the coolant bottle, I have taken the attached Relative Compression waveform but I am unsure if it is enough to suggest there is an issue, Has anyone any advice that you could offer on this?

Hi,
What does the dips in current draw mean (lower peaks) when it is operating? There doesn't seam to be much of a pattern?
Thanks

Shogun HBB.psdata Shogun HBB Good.psdata Hi, Can anyone tell me looking at this waveform what is wrong with the motor on the hbb on a Shogun that I am currently working on. I have also attached a known good one that I took from another vehicle I have here but I am intrigued to know how to understan...

I want to count the rising count on a crankshaft waveform but the missing tooth is on 2 different pages on the buffer is it possible to move the rulers onto different pages?

I understand that it should reach full pressure under 1 second on most systems but I am asking if the rule applies to this Denso system

Can anyone tell me how to tell if a scv/ drv is normally open/ closed at rest? (Switched off)

Looks good thanks have you any idea of rise time from idle to full fuel pressure

I don’t have iatn

I have checked the waveform library but can’t see anything the same or similar