if I would have known this I would have borrowed the tool to make the job easier I told you that the PSG 5 could be read independently :? Can't find that information you said you advised? terminal 5 must be the voltage supply, but where from? Consult a WD. A wiring diagram will not tell you anythin...

From previous thread. Vauxhall Astra G fuel injection pump control unit was to the best of my ability diagnosed as malfunctioning, I concluded that using TIS checking procedure that the control units pins 1 and 2 did not have a voltage present, recording 00.04v I sent the fuel injection control unit...

Sorry didn't know what you were getting at, but when the controller is sent back Tuesday I will be scoping and keeping a record of data for future use. Thanks for your replies.

I almost forgot, with the correct equipment you can read the pump controller for DTC's I have TECH II, this read the codes. TIS does not detail which control module, i.e. the ECM or the fuel injection control module actually supplies the 0.5...4v, so at that point I was not able to establish if the...

The electronics company rang me today and said that they tested the fuel injection control module and found that the module was faulty, they have advised that they have now repaired it and charged me £225, they tell me that the module will be back with me next Tuesday, so based on current work load ...

has anyone got any advice please as I have done about the best I can. yes consult TIS for yourself. Also if the code is not present then does it return KOEO or KOEC ? Oh & no mention of data stream neither ? Was initially having problems with TIS hence asking Vauxhall, however I have now got TIS up...

Bit of an old car these days, but people still require them repairing where it is cost effective to do so. I had an Astra G 1998 2.0 Di dropped on me today, the car will not start, cranks ok but that is it. I checked for codes using TECH II and was presented with P1631 (B) fuel injection control mod...

Hi everyone, New to this forum, I am looking to purchase the Pico Mixmaster 12 channel ignition secondary adapter to use with my scope. I have looked on the website and can see two carts for ordering, but before I commit myself to purchase I would just like to know if the Mixmaster arrives with any ...