Pico Technology

You have posted this request on our Automotive Forum, whilst we do have a forum for Test and Measurement questions I would suggest that you email this request and a matching psdata file for this capture directly to support@picotech.com If you explain what data you would expect to see then someone in...

Can you re post this on our Test and Measurement forum www.picotech.com/support/

The PicoScope software will only work with our Automotive Scopes, it will not work with third party devices.

No version of PicoLog will be compatible with the 4425-017 if you wish to discuss this then please email support@pioctech.com

Further to this to check versions type these three commands

For the installation on the Raspberry Pi can you try

Code: Select all

sudo apt-get purge wget
sudo apt-get install wget
wget -O - https://labs.picotech.com/debian/dists/picoscope/Release.gpg.key | sudo apt-key add -

and if it still hangs cut and paste the console output so we can take a look.

You can find it from the Downloads link at the top of this page.

Do you have a PicoScope ?

Two things to do to improve the capture :- Edit the Math Channel so that the range is 0 to 100, the range it auto guessed is totally wrong which sometimes happens. Add a trigger event on the channel you wish to stabilize and make sure it is at 50% so everything is located around the middle of the sc...

Can you post a data file so we can look at the setup?

PicoScopes
& kits

For vehicle manufacturers

EV kits and
accessories

Noise, Vibration and Balancing

Milliohm tester

Pressure sensors

Current clamps

Breakout
leads/boxes

Accessories

Automotive Forum

Search found 362 matches

Re: CAN transmission

Re: PICO LOG 1012 Monitoring PLC INPUTS

Re: MaxiScope compatibility with Picoscope software

Re: Which PicoLog version is compatible with Picoscope version 4425-017

Re: Yet Another Parasitic Draw Case

Re: Yet Another Parasitic Draw Case

Re: picoscope 3223

Re: Can anyone help please

Re: sync to RPM