Hi Steve Downloaded edited file and Pico still crashes. I'm on another computer though. BTW 60/48*freq(A)*1.9625*60/1000 and 1.25*freq(A)*0.11775 work fine for me. But when in demo mode and creating math channel 60/48*freq(A)*(3.14 * 0.625)*60/1000 crashes Pico. I can enter thos formula (no red cro...

pico2.png Crank signal with 60-2 tooth pattern in red. Graphed engined speed from crank sensor signal in black. 360 degrees marked and partitioned evenly by 60 degrees. Each crank tooth is 6 degrees. If engine would run at constant speed all the time then partition rulers should be at the same plac...

Hi Steve Downloaded edited file and Pico still crashes. I'm on another computer though. BTW 60/48*freq(A)*1.9625*60/1000 and 1.25*freq(A)*0.11775 work fine for me. But when in demo mode and creating math channel 60/48*freq(A)*(3.14 * 0.625)*60/1000 crashes Pico. I can enter thos formula (no red cros...

I wanted to try this ABS to road speed but my Pico just crashed when opening that.

Trace attached if interested,

I personally think that Pico should stop using regional settings and hard code decimal and other things. So that formula in England would work the same way as in Denmark or in Estonia. Biggest problem is that in Estonia we use "," as decimal but you use "." You have "," for digit grouping. We have "...

1. Should I hear the pump run when the ignition is turned on – or do I need to crank over? Pump should run for couple of seconds when you turn ignition on and then stop. When you crank then pump will run constantly. 2. How can I connect 12 volts to the fuel pump directly to test it? THERE IS NO PEM ...

My post was reply to landroverman1958 how claimed that CR14 1,4L (from first post) has same pattern as 1,2L he posted image about. We can arque what means identical engine but there are engines that are the same with same engine code but pattern changes in years. So if engine code is the same but ca...

CR14 engine (mentioned in first post) is 1,4 L.

Different engines and even same engines but different years can have different patterns.

At the moment ; instead of , works for me.

Good old non-UK regional settings problem. You are in Denmark so using different settings for decimal? At least math channels that need comma don't still work correctly with Estonian settings because these are different than UK.