good morning friend, the problem is here look at version 6.14.5, look at the attenuators in the software 10: 1- 20: 1,note that even the coil on plug probe has been removed from version 6.14.20, and version 6.14.5 is present

yes

print to panel probe

good morning everyone, i went to use my pico 4425 4 channels now and i came across something i'm using version 6.14.20 i went to analyze an ignition system and in the option of probes were the attenuators removed?

Hello Steve always guiding us, but in my humble opinion I still prefer PicoScope 6, this 7 I already downloaded and found the Zoom a little strange, which in the 6 is fantastic, since the probes are also strange to me the ways

Hello Steve thanks for your return and as always ready to help us, and amazingly it seems yes and the same vehicle these catches, an automatic honda civic 2.0 2016 FLEXONE fuel alcohol and gasoline, so I put this post because the idling measurements are beating yes around 6 bar, I made a custom prob...

Hello friends good morning, it would be interesting to put the option of changes and configuration of pressure measurements, as can be done with custom probes because the values are very out I am using another type of transducer but with the custom settings worked well the measurements hit the press...

I understand friend, but in this function that you mentioned moves the whole screen, in this option I had before it was possible to advance or delay only one signal example if I caught a wave of vacuum I could advance or delay it in relation to another signal as a signal. rotation

he had the delay option in ms

hello friends I don't know if it's only mine that is not appearing the option to advance the image left or right only appears up and down