Search found 230 matches

by KimAndersen
Tue Jul 13, 2021 6:45 am
Forum: Diagnostic discussion
Topic: [Help] Motorcycle ignition waveform
Replies: 7
Views: 551

Re: [Help] Motorcycle ignition waveform

Hi liviu2004 That's a typo on my part - it's of course 10000 microFarad. :wink: The charging system itself consists of a generator, a rectifier and a capacitor, able to accumulate energy for a short time and keep voltage as constant as possible. Without this capacitor you will not be able to start t...
by KimAndersen
Mon Jul 12, 2021 12:02 pm
Forum: Diagnostic discussion
Topic: [Help] Motorcycle ignition waveform
Replies: 7
Views: 551

Re: [Help] Motorcycle ignition waveform

Hi there I might be able to help you with some waveform of the secondary ignition system - not coil onplug system. This waveform is taken from a single-cylinder 250 cc Trial Bike (Honda Montesa 4RT) from the year 2007 and which I myself have ridden Trial on. This motorcycle from Honda was the first ...
by KimAndersen
Mon Jun 28, 2021 9:01 pm
Forum: Help me fix my car
Topic: 2.0 TDI no start, audi a6
Replies: 3
Views: 534

Re: 2.0 TDI no start, audi a6

There is of course the possibility that when replacing the high pressure pump, that the timing belt is not correctly fitted according to technical data.

And here I am thinking of using the correct locking tool for the crankshaft and camshaft - it was worth checking again.

Regards
Kim
by KimAndersen
Sat May 29, 2021 8:13 pm
Forum: PicoScope 7 Automotive software
Topic: PicoScope 7 Automotive Software
Replies: 66
Views: 36286

Re: PicoScope 7 Automotive Software

A comment about the latest PicoScope 7 version 7.0.73.8350 which I have tested today, where I have used the function serial decoding of a canbus signal. I mean - that this feature has become significantly more stable than previous versions and in my own little canbus test there was no dropout on the...
by KimAndersen
Mon Feb 15, 2021 8:27 pm
Forum: Diagnostic discussion
Topic: SENT vacuum sensor??
Replies: 7
Views: 1989

Re: SENT vacuum sensor??

Hi Here is a link to an earlier post regarding decoding a rail pressure sensor where Ben Martins and I describe in detail the problems that can be with the decoding of various SENT sensors. https://www.picoauto.com/support/topic22061.html I think one of the reasons you do not see any data being deco...
by KimAndersen
Sat Dec 19, 2020 11:34 am
Forum: PicoScope 6 Automotive software
Topic: Current Clamp Problems
Replies: 1
Views: 2813

Re: Current Clamp Problems

Hi martinnr I do not know if it is quite the same problem you have with your current clamp as I had with my low current clamp. You can read what my problem was in this post. I can say so much that - it was driving me crazy. https://www.picoauto.com/support/topic21291.html Hope you fi...
by KimAndersen
Thu Nov 05, 2020 3:30 pm
Forum: PicoScope 6 Automotive software
Topic: K-Line Serial Decoding Support?
Replies: 9
Views: 5689

Re: K-Line Serial Decoding Support?

Hi Ashtray1987

As Ben mentioned - try uploading your K-line psdata file and explain to us what your problem is or what you would like to know and maybe I can help you a little. :wink:

Regards
Kim
by KimAndersen
Mon Jul 27, 2020 5:17 pm
Forum: Heavy Duty and Off Highway
Topic: Smart Sensors
Replies: 23
Views: 10566

Re: Smart Sensors

Hi muttnjeff I can not display anything from the J1939DA document based on SAE.ORG's copyrights or anything else - I dare not. Regarding your question about sensor reporting, this document is very detailed regarding PGN and SPN numbers about where and what the individual bytes / bits have been used ...
by KimAndersen
Sun Jul 26, 2020 8:46 am
Forum: Heavy Duty and Off Highway
Topic: Smart Sensors
Replies: 23
Views: 10566

Re: Smart Sensors

Hi What an interesting topic - the interpretation of the J1939 protocol. I have to admit that I have been following this topic from the beginning and thought it could be exciting and so is it. But in what way can I help you understand the J1939 protocol and its operation !. Ben has described most of...
by KimAndersen
Sun Jul 12, 2020 2:18 pm
Forum: Help me fix my car
Topic: Kia Sportage 2011 performance
Replies: 3
Views: 2705

Re: Kia Sportage 2011 performance

Hi Wim It is a broadband oxygen sensor used before the catalyst converter on this Kia Sportage. As for your voltage measurement from this broadband sensor is good or bad is hard to say but I know this sensor works with a voltage range from 0 mV to 4500 mV - so you are not out of specifications with ...