Is it possible to make a math channel for this mre signal to see the rpm.
With the crank function i don't get a signal and with frequency it is also a mess.
Solved the problem, because the problem started after the head was off, I focused to much on the timing issue. After checking the timing mechanical and this was good I looked good at it again, when the lambda was active, bank 1 showed in the live data 0,7 lambda so this is rich but measuring at the ...
Hello, I have the following problem with this Audi a4 2.6 v6. The car is running bad and misfiring on bank 1, measuring lambda at this bank showing it runs lean until it goes into limp mode and then it starts running a little bit beter, bank 2 runs good lambda is switching good. They owner pulled th...
I and I suppose Tode mean why do you put the wps in line in the circuit, the flow now goes trough the wps,
why don't U use a t fitting in the return line and leave the system as it is?
Hello I was wondering if someone has a answer to the question from the post above?
I ask myself the same question why don't t in the wps in the circuit?