Holden Colorado 3.0vcdi

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
aldfuel
Newbie
Posts: 1
Joined: Tue Jan 13, 2015 8:36 am

Holden Colorado 3.0vcdi

Post by aldfuel » Thu Jan 15, 2015 7:55 am

Hi we are battling with a Holden Colorado here that goes in limp mode and only rev 2000rpm? I've checked with the pico scope the cam sensor and also the crank angle sensor and from the two only the cam angle sensor has a clear pattern. The wires from each sensor to the ecu has been tested and the plugs itself aswell. Any idea?

volrem
TwoWaves
TwoWaves
Posts: 231
Joined: Fri Jan 03, 2014 3:43 pm
Location: Estonia

Re: Holden Colorado 3.0vcdi

Post by volrem » Thu Jan 15, 2015 5:56 pm

If it goes go limp mode there has to be related fault code stored. What does the code say?

Also post your waveform.

User avatar
Fat Freddy
TwoWaves
TwoWaves
Posts: 314
Joined: Fri May 04, 2012 4:52 am

Re: Holden Colorado 3.0vcdi

Post by Fat Freddy » Sun Feb 01, 2015 10:29 am

Nice post.

To the ROTW I think it's AKA an Isuzu D-Max. No year so who knows.

Any idea's? From description. Have you checked carpet under accelerator pedal?

HTH
FF

Post Reply