i'm using the adc212, but your automotive demos are all recorded using a adc12? and i can't open it unless i change my setttings.
If the demos in future are saved for different machines like mine then when you open a saved picture then all the x & y settings and probe settings should be automatic be set to use
easy setup
Sorry to hear, that this seems to have caused problems for you.
This is unfortunately unavoidable, the demo data generation algorithm is designed to be used with the ADC-12. However, when you come to use the actual Automotive Software, all waveforms are recorded with the ADC-212.
I will pass on your comments to the software team as they will probably help to make our demos more useable in future.
Best Regards,
This is unfortunately unavoidable, the demo data generation algorithm is designed to be used with the ADC-12. However, when you come to use the actual Automotive Software, all waveforms are recorded with the ADC-212.
I will pass on your comments to the software team as they will probably help to make our demos more useable in future.
Best Regards,
Matt Everett
Pico Software Engineer
Pico Software Engineer