Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Is ther a reason why there is no preset setting in the automotive drop down tab for common rail injector voltage (only current) compared to petrol injectors which list voltage and current. Hope someone can answer my question
- Posts: 15
- Joined: Wed Aug 01, 2007 8:38 pm
- Location: MN
I suspect the reasoning has a lot to do with the wide variety of strategies used to actuate the injector(s). Some operate on 5 volts, others over 100.
HTH. Later, Matt.