Fluke clamp meter 333

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Treyrooster
Newbie
Posts: 1
Joined: Sat Jul 08, 2023 4:18 pm

Fluke clamp meter 333

Post by Treyrooster »

Can I use this meter attached to my picoscope to generate a waveform? I don’t want to damage either. Has anyone tried this?

ben.martins
Pico Staff Member
Pico Staff Member
Posts: 534
Joined: Tue May 16, 2017 1:02 pm

Re: Fluke clamp meter 333

Post by ben.martins »

Hello,

I've taken a quick look at the clamp and it doesn't appear to have an output. Without that we have no way of providing the scope the input it needs to display the waveform. https://www.myflukestore.com/p1247/fluk ... _meter.php

Also looking at the specifications, this clamp can only measure AC current. This will mean testing injector current for fuel pumps, injectors, alternator output will not be possible as these require a DC current clamp to measure amplitude.

Hope that helps in some way.

Kind regards

Ben

Post Reply