RPM box

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
paullap
OneWave
OneWave
Posts: 13
Joined: Sat Oct 27, 2018 2:07 pm

RPM box

Post by paullap »

Hi I dont seem to have the rpm box on my screen, Do I need to turn something on?.


Paul

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1581
Joined: Sun Aug 25, 2013 7:22 am

Re: RPM box

Post by Steve Smith »

Hello Paul thank you for the post.

Could you check you have the Automotive version of PicoScope downloaded from the link below:
https://www.picoauto.com/downloads

It may be that you have the T&M version downloaded from https://www.picotech.com/

If you have the T&M version downloaded you will also be missing the Automotive tab that contains the Guided Tests for your chosen measurement
Automotive
Automotive
I hope this helps, take care......Steve

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: RPM box

Post by Martyn »

If you do have the automotive version then Tools->Preferences->Options has a tick box for RPM.
Martyn
Technical Support Manager

Post Reply