Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
-
McTech
- Newbie
- Posts: 5
- Joined: Wed Jan 21, 2015 10:28 pm
Post
by McTech »
To the tech and mods,
I am Red Green colour blind = wiring! Not problem as test tools confirm what your looking at.
But I have a real problem seeing the difference in channel colours on software. If I overlay red and green my the colours dance around and flicker.
How difficult would it be to enable customised channels colours? Not very I think
Personally I would like CMYK or something close to it.
IDK... just a thought.
Cheers
-
volrem
- TwoWaves
- Posts: 243
- Joined: Fri Jan 03, 2014 3:43 pm
- Location: Estonia
Post
by volrem »
Not difficult at all.
Just go to Tools -> Preferences - Colors and choose any color you like.
-
Autonerdz
- TwoWaves
- Posts: 387
- Joined: Wed Nov 20, 2002 4:19 pm
- Location: Washington State USA
Post
by Autonerdz »
How difficult would it be to enable customised channels colours?
Yes, easy. Tools/Preferences/Colors tab
Edit:
Ha! Beat me to it Volrem.
-
McTech
- Newbie
- Posts: 5
- Joined: Wed Jan 21, 2015 10:28 pm
Post
by McTech »
Brilliant - thanks.
Thats nearly as simple as me..
Si