Hello,
I have a 2008 Ford Focus with a bad start,white smoke and irregular idle .
At the first check injectors 1,2 and 3 have leaks on return.
Checking the pressure on the return wasn't a step forward...but I lost the recording because of my laptop issue
The injectors was checked on a diesel bank and again 1,2 and 3 not passed the test
Today I received my new adapter and measuring the compression I see something strange...on some cylinders the compression increase ,on other cylinders the compression decrease...
The engine was cold,injection was disabled,the injectors was removed from engine,all recordings was made in 3-5 minutes.
Any advice is wellcome.
If the injector(s) are not sealing at the return ball bearing then compression will be affected. for now it is just an area to explore. I have seen Compression leak in to the Injector return
Hello,
Today I made some new measurements:WPS body+hose+adapter(measured at 6ml) have 14 ml.
But... Compression test /Pico Diagnostics give me 3 different results at 3 measurements.What I can see in Raw Data is some noise at the battery voltage!All 3 measurements was done with the same setup,one after another!Why the results is different?Maybe some filters will remove the noise from raw data...
Thank you