secondary ignition settings.

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
jez134

secondary ignition settings.

Post by jez134 »

i am having trouble with the patterns displayed for secondary ignition using the settings from the drop down automotive menu. the traces i get look nothing like the ones shown on the help file.
i've turned up the samples per trace but havent tried block mode yet (will block mode make the pattern "better", seen it mentioned on autonerdz forum).
are there a definitive bunch of settings that will universally work?
as a novice i find it difficult to trust the views i get on the scope. this knocks confidence and prevents me gaining any experience in diagnosing ht faults with the scope.

many thanks, jez.

User avatar
ricardo
OneWave
OneWave
Posts: 25
Joined: Wed May 07, 2003 9:43 am

Post by ricardo »

Hi Jez,

I'm sorry that you are having problems capturing secondary ignition waveforms. I should be able to help you better over the phone while you are at the PC. If you want to leave me a number I can call you back, alternatively call the office and ask for me when it suits you.

Speak to you soon,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator

jez134

phone number

Post by jez134 »

hello ric. am on 01305269999.

Post Reply