Automotive related issues

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Paco Romo

Automotive related issues

Post by Paco Romo »

I 'd like to know if the inputs for the automotive oscilloscope can be configured as diferencial inputs or are they already in common ground mode?, what if I'd like to take readings directy from the battery terminals and at the same time connect the other channel to the positive terminal of the battery and to the positive terminal of the altenator to check for voltage drops in alternator to battery cables ?

User avatar
ricardo
OneWave
OneWave
Posts: 25
Joined: Wed May 07, 2003 9:43 am

Post by ricardo »

Hi Paco,

The inputs to the Pico Automotive oscilloscope share a common ground, so if you are using multiple channels on the scope they will all have to be connected to the same ground.

Best regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator

Post Reply