hi my name is craig i work for a small garage in cornwall.do quite a lot of diagnostic work ,the tool is very good.got the pico four channel scope just wanted to know how to upload waveforms on the libary.
thanks
You can find the Waveform Library under the File menu in the PicoScope software. You sign-in to the library using the same credentials as you use for this forum, and must have a PicoScope connected and an internet connection.
Once you are signed in, you can actually close the library itself and perform your tests as normal. When you then choose File > Save, you can choose Save and Share.
This will save a local copy to your PC and will upload the waveform to the library.