Ford Focus 1.8 TDCI

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Ford Focus 1.8 TDCI

Post by victor2k »

Hello,
I used yesterday my 4425 to see the signal for the fuel metering valve Y28 on a non-starting Focus /2002/1.8 TDCI.
Using a clampmeter TA018 I can see a very low gnd signal from ECU(only 400 mA-peak) on Y28.
Where I can see a similar capture?
Thank you.
Attachments
y28 1.8tdci.psdata
(18.23 MiB) Downloaded 599 times

victor2k
TwoWaves
TwoWaves
Posts: 337
Joined: Thu Jan 28, 2016 7:17 am

Re: Ford Focus 1.8 TDCI

Post by victor2k »

Hello,
The signal from Y28 was OK,if anyone need can be used as reference.
Thank you. :|

Post Reply