Opel Y30DT stopped warm

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
T-by
Newbie
Posts: 7
Joined: Sun Jul 12, 2009 9:57 am

Opel Y30DT stopped warm

Post by T-by »

Hi from Hungary!
I would like to ask for help, an Opel Signum/Vectra C Y30DT problem. The symptom is that the engine is at operating temperature, the idling stop ECU. Error code no. However, if the camshaft sensor plug puller, it continues to run smoothly. My guess is that the controller sync problem is, there is no reference only my drawings for this model. It would be nice if someone would be this type of CAM / CRANK correlation. Many thanks in advance. (sorry for the translation)
Attachments
signum_y30dt_cold_still_working.psdata
(811.49 KiB) Downloaded 600 times
O_signum_2.jpg

PicoPhil
Pico Staff Member
Pico Staff Member
Posts: 71
Joined: Thu Dec 23, 2010 11:38 am

Re: Opel Y30DT stopped warm

Post by PicoPhil »

Hi
Sorry but this vehicle is very rare in the UK and has a Denso 0100 system. This may be the reason for no reply on the forum group in the UK.
I presume due to the date of the sent post that you have repaired the vehicle.
Can you tell us what the out come of this problem.
Thank you
Philip

Post Reply