WPS600

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
User avatar
Interrupt
OneWave
OneWave
Posts: 21
Joined: Wed Jan 09, 2013 7:07 pm
Location: Queensland, Australia

WPS600

Post by Interrupt »

I was window shopping and come across this statement"Not for continuous operation" on the WPS600 page and was wondering what it means..... What is considered continuous operation ??

Liteace
TwoWaves
TwoWaves
Posts: 238
Joined: Fri Jan 27, 2012 12:25 pm

Re: WPS600

Post by Liteace »

anything that's constantly monitoring pressure as opposed to just testing it

User avatar
Interrupt
OneWave
OneWave
Posts: 21
Joined: Wed Jan 09, 2013 7:07 pm
Location: Queensland, Australia

Re: WPS600

Post by Interrupt »

That a pretty wide statement say I've got a intermittent faulty that only occurs very intermittent like every two hours is this testing or continuous operation ?

What I'm after is something a little more specific ie: at 8000psi a 1 min test period is acceptable.

Alan
Pico Staff Member
Pico Staff Member
Posts: 264
Joined: Thu May 25, 2006 8:02 am

Re: WPS600

Post by Alan »

The WPS600 is intended for diagnostics but not permanent mounting / use.

The battery life between charges is a few hours so its fine to leave it connected until the battery goes flat.

User avatar
Interrupt
OneWave
OneWave
Posts: 21
Joined: Wed Jan 09, 2013 7:07 pm
Location: Queensland, Australia

Re: WPS600

Post by Interrupt »

Thanks Alan

Post Reply