use of a Fluke pressure transducer

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Posts: 1
Joined: Wed Nov 06, 2013 12:29 am

use of a Fluke pressure transducer

Post by Amopower » Wed Nov 06, 2013 12:32 am

Is it possible to use a Fluke 919811 PV350 pressure transducer with my 4 channel scope, or do i need to get the Pico one?
I don't want to lose anything I might be gaining if I got the Pico one, but dont want to waste my money if I dont need to either.

thanks alot

User avatar
Fat Freddy
Posts: 318
Joined: Fri May 04, 2012 4:52 am

Re: use of a Fluke pressure transducer

Post by Fat Freddy » Wed Nov 06, 2013 9:46 am

AFAIK it is possible but apparently the Fluke is very sensitive to noise and accuracy is also not so great.
The WPS is a great tool.

You will also have to make up your probes as well.


Post Reply