2006 Mazda 6 L3 2.3

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
s4c
TwoWaves
TwoWaves
Posts: 51
Joined: Thu May 01, 2008 8:50 am

2006 Mazda 6 L3 2.3

Post by s4c »

Hi

Can anyone help me with a good trace for a 2006 Mazda 6 L3 2.3 Cam and crank.

This on has the 3 wire hall effect sensors. I have quite a few traces with faulty timing chain but would like a trace of a known good.

Regards

Simon

modo
OneWave
OneWave
Posts: 22
Joined: Thu Jun 21, 2012 10:02 pm

Re: 2006 Mazda 6 L3 2.3

Post by modo »

I have 2008 I think it's a 2.3 from memory the 2.0 and the 2.3 are the same.{ I hope} look at it and see what you think.
Attachments
2008 6 CKP CAS Coil Control Injector #1.psdata
(2.48 MiB) Downloaded 845 times

s4c
TwoWaves
TwoWaves
Posts: 51
Joined: Thu May 01, 2008 8:50 am

Re: 2006 Mazda 6 L3 2.3

Post by s4c »

Thanks for that, but it seems a bit different from mine.

Would be happy to hear your thoughts.

Regards

Simon
Attachments
Cam and Crank 003.psdata
(184.54 KiB) Downloaded 820 times

modo
OneWave
OneWave
Posts: 22
Joined: Thu Jun 21, 2012 10:02 pm

Re: 2006 Mazda 6 L3 2.3

Post by modo »

I have Mazda 2's & 3's they are all different I can send them to you but I don't think they will help. :oops:

s4c
TwoWaves
TwoWaves
Posts: 51
Joined: Thu May 01, 2008 8:50 am

Re: 2006 Mazda 6 L3 2.3

Post by s4c »

Hi

If you could post them it would be great.

Regards

Simon

modo
OneWave
OneWave
Posts: 22
Joined: Thu Jun 21, 2012 10:02 pm

Re: 2006 Mazda 6 L3 2.3

Post by modo »

This is a 2005 Mazda 2 1.5lt
Attachments
2005 Mazda2 1.5lt CAS CKP Coil Injector.psdata
(2.2 MiB) Downloaded 788 times

s4c
TwoWaves
TwoWaves
Posts: 51
Joined: Thu May 01, 2008 8:50 am

Re: 2006 Mazda 6 L3 2.3

Post by s4c »

Many thanks for that.

Simon

onboardtech333
OneWave
OneWave
Posts: 11
Joined: Sat May 25, 2013 5:37 pm

Re: 2006 Mazda 6 L3 2.3

Post by onboardtech333 »

This should be the same as yours
Unfortunately pc is down so I cannot check your attachment till I'm back at work
Attachments
image.jpg

s4c
TwoWaves
TwoWaves
Posts: 51
Joined: Thu May 01, 2008 8:50 am

Re: 2006 Mazda 6 L3 2.3

Post by s4c »

Thanks for the waveform ,however , that one is from the 2 wire sensors, my one is the hall affect 3 wire.

Just to add, the one I posted is a known good.

Regards

Simon

User avatar
Robski
Advanced User
Advanced User
Posts: 598
Joined: Tue Sep 14, 2010 6:36 pm
Location: Yorkshire

Re: 2006 Mazda 6 L3 2.3

Post by Robski »

OBT

Just wondering was that capture yours to share ? (IATN label)

Post Reply