Come here to introduce yourself, who you are, what you do, and tell us your
experience with our automotive products.
Dundeeguy
OneWave
Posts: 40 Joined: Thu Apr 11, 2013 1:13 pm
Location: Emm, kinda obvious!
PicoMike
Pico Staff Member
Posts: 338 Joined: Mon Jan 31, 2011 11:22 am
Location: UK
Post
by PicoMike » Thu Apr 11, 2013 2:48 pm
Welcome to the forum, always good to see new members, and training course booked up too... great stuff
Do you get our monthly newsletter?
Mike Valentine
Online BDM: Pico Technology
Dundeeguy
OneWave
Posts: 40 Joined: Thu Apr 11, 2013 1:13 pm
Location: Emm, kinda obvious!
Post
by Dundeeguy » Fri Apr 12, 2013 6:26 am
AuthorMike wrote: Do you get our monthly newsletter?
Yeah, already signed up for it
Neilcur
TwoWaves
Posts: 68 Joined: Sun Feb 17, 2013 7:47 pm
Location: South West Scotland
Post
by Neilcur » Mon Apr 22, 2013 1:48 pm
Hi,
I'm doing course this weekend in glasgow with matt aswell so see you there!
Thanks Neil
Dundeeguy
OneWave
Posts: 40 Joined: Thu Apr 11, 2013 1:13 pm
Location: Emm, kinda obvious!
Post
by Dundeeguy » Tue Apr 23, 2013 6:33 am
Neilcur wrote: Hi,
I'm doing course this weekend in glasgow with matt aswell so see you there!
Thanks Neil
Hi Neil,
Good to know I won't be the only one there! I think Matt said there would be about 7 or 8 people going.
I don't know if you have ever been up to Kingsway MOT Centre before, if not, its well equipped, clean and tidy workshop with a nice big flat screen to run the scope through
Cya Saturday!
Neilcur
TwoWaves
Posts: 68 Joined: Sun Feb 17, 2013 7:47 pm
Location: South West Scotland
Post
by Neilcur » Tue Apr 23, 2013 8:14 am
Hi,
I haven't been there before but it looks pretty impressive going by there website anyway!
Are you taking anything with you, i.e laptop with some of the waveforms you have captured?
Thanks Neil
Dundeeguy
OneWave
Posts: 40 Joined: Thu Apr 11, 2013 1:13 pm
Location: Emm, kinda obvious!
Post
by Dundeeguy » Tue Apr 23, 2013 1:11 pm
I won't have anything with me.
The scope has hardly been used, and when it has been, have ended up not quite getting results I would expect!
To be fair though, we have been very busy, so never managed to give the scope the time it deserves
Hopefully come next week I will be using it with confidence, I hope
Cheers,
Kevin
Neilcur
TwoWaves
Posts: 68 Joined: Sun Feb 17, 2013 7:47 pm
Location: South West Scotland
Post
by Neilcur » Tue Apr 23, 2013 1:31 pm
Hi,
Yeah think i will be the same aswell, understanding timebase and sample rate set up is what let's me down but i'm sure after the weekend it will all make sense.
See you on saturday!
Thanks Neil
Wally
OneWave
Posts: 18 Joined: Thu Jan 20, 2005 11:58 pm
Location: North Yorkshire Uk
Post
by Wally » Tue Apr 23, 2013 10:12 pm
I did the two day course with Matt last year and think all of you will enjoy and benefit from what he has to say.
Wally
Dundeeguy
OneWave
Posts: 40 Joined: Thu Apr 11, 2013 1:13 pm
Location: Emm, kinda obvious!
Post
by Dundeeguy » Sat May 04, 2013 11:30 am
Hi Wally,
You were right, the course was great and pretty easy to understand.
I no longer use the automotive presets when using the scope, and just set it up manually. Seems like the 'mist' has lifted quite a bit on the use of the scope.
Matt, if your reading, thanks a million
Kevin.