Hi guys was just playing with WPS on a K12 micra today i took a capture of exhaust pressure and current on cyl 4 coil.
I disconnected an injector in the middle of the capture can you pick whitch cylinder it is and tell me how you came to a choice.
I would say cylinder 3 but there again Im still learing as well + I dont have a WPS and it would take me a lot as what your doing to get the hang of it
Hi yes it was cyl 1 injector disconnected.
So to work it out do you +1 to the cyl that lines up on screen to allow for length of exhaust.
Rob the cranking compression test i was just checking is that how you would set up for taking capture for your libarary or would you leave out the cam/crank.
On this K12 you have to remove plastic housing with throttle body to get at spark plugs so no air restriction on cranking compression.
Thanks Damian
I could edit mine and change my 3 to a 1 but I wont , this is the 1st page ive gone straight to this morn I was dying to know, with the picture and a a little explanation I can sort of see it now. Do one for me as well please Rob