overlay

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Liteace
TwoWaves
TwoWaves
Posts: 238
Joined: Fri Jan 27, 2012 12:25 pm

overlay

Post by Liteace »

Im just looking at the demo software, does it have an overlay feature ?

Thanks
DONT SHOOT YOURSELF IN THE FOOT

User avatar
Robski
Advanced User
Advanced User
Posts: 598
Joined: Tue Sep 14, 2010 6:36 pm
Location: Yorkshire

Re: overlay

Post by Robski »

Do you mean a reference capture ?

Right click on capture screen > reference > select channel

Liteace
TwoWaves
TwoWaves
Posts: 238
Joined: Fri Jan 27, 2012 12:25 pm

Re: overlay

Post by Liteace »

Like when you capture a bad wave from a dodgy whatever and then fix the fault and capture a good wave can you overlay one on top of the other for viewing onscreen or printing ?
DONT SHOOT YOURSELF IN THE FOOT

User avatar
Robski
Advanced User
Advanced User
Posts: 598
Joined: Tue Sep 14, 2010 6:36 pm
Location: Yorkshire

Re: overlay

Post by Robski »

yes pretty much

Liteace
TwoWaves
TwoWaves
Posts: 238
Joined: Fri Jan 27, 2012 12:25 pm

Re: overlay

Post by Liteace »

Ive look in the help section and nothing about overlay, how do i do it ?

Thanks
DONT SHOOT YOURSELF IN THE FOOT

User avatar
Robski
Advanced User
Advanced User
Posts: 598
Joined: Tue Sep 14, 2010 6:36 pm
Location: Yorkshire

Re: overlay

Post by Robski »

right click on screen > select reference waveforms > then select the channel you wish to reference, it will then add it to screen.

Liteace
TwoWaves
TwoWaves
Posts: 238
Joined: Fri Jan 27, 2012 12:25 pm

Re: overlay

Post by Liteace »

Thank you again, if it wasnt for this forum i'd be C.T'ed

Thanks again
DONT SHOOT YOURSELF IN THE FOOT

User avatar
Robski
Advanced User
Advanced User
Posts: 598
Joined: Tue Sep 14, 2010 6:36 pm
Location: Yorkshire

Re: overlay

Post by Robski »

If you want to then keep that reference waveform duplicate it by :- Tools > reference waveforms > select the loaded waveform you just referenced (not tick the box,click the name so it highlights blue) > click duplicate tab > then it duplicates in your library section for future use.

Post Reply