3223 Scope

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
PeterM
OneWave
OneWave
Posts: 11
Joined: Fri Jun 26, 2009 2:51 pm
Location: Saddleworth

3223 Scope

Post by PeterM »

Hi

I would appreciate some guidance from a helpful person as to how to put 2 waveforms on screen at the same time, explaining briefly voltages and timebases for the different waveforms that would be on screen.

An example would be very helpful. I just need to know that I am doing it right. Also how would you apply the data measurements table to 2 different waveforms at the same time.

I am sure this will be helpful to others.

Thanks Peter.

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Pico 6 Intro

Post by Autonerdz »

Hi Peter,

You may find this helpful...

http://www.autonerdz.com/flash/ps6intro.html

_________________
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

PeterM
OneWave
OneWave
Posts: 11
Joined: Fri Jun 26, 2009 2:51 pm
Location: Saddleworth

3223 scope

Post by PeterM »

autonerdz,

Thanks for the reply. Does not really help me though as it keeps shutting off. I have got a pico 6. Ijust wanted a few answers to the above question if possible.

thanks peter

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Movie

Post by Autonerdz »

Peter,

You do need a high speed internet connection to view the movie. Do you have access to one? I think you will find it worth viewing. A picture is worth a thousand words.

You can also put the movie on pause and wait until it fully loads on a slower connection. Then it should play fine.

_________________
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

Post Reply